DIY: A No-Paint, No-Sew, Super-Cheap, Super-Easy, Awesome China Cabinet Make-Over!

We really like to paint around here so most of our DIY projects involve—you guessed it—paint.

Not this one! Grab your glue guns for this no-paint, no-sew, super-cheap, super-easy awesome china cabinet makeover.

This china cabinet belonged to my grandmother and still sports the light blue tint from a DIY “antiquing kit” my grandfather used in the early 1980’s to give it this beautifully unique finish. I didn’t want to paint over it, but the color didn’t quite match anything else in my dining room.

chinacabinet_before

I used my Mom’s china cabinet as my inspiration for this project. (In other words, I totally copied her idea!) Her white dishes weren’t showing up so well after she painted her china cabinet white so she created a pretty backdrop by covering foam board with floral fabric. Not only is this idea super-cheap and super-easy, it is also temporary. When you are ready to change looks, just pop out the panels and toss them.

mom_china_cabinet

For this project you will need:

  • a tape measure
  • foam board
  • fabric
  • scissors or cutting board/fabric cutting tool
  • glue gun or fabric glue

Step 1: Start by measuring the space for each panel you are creating to figure out how much fabric and foam board you will need.

chinacabinet_measure

I measured each panel separately—and I’m glad I did because although the height of each section looked the same at first glance, they actually varied by as much as an inch when I measured. I used one piece of foam board per panel and fabric leftover from my dining room chair seats. I bought the foam boards at the dollar store so this project cost me a whopping $4! Woo hoo!

NOTE: The space in my china cabinet was 31 inches wide, but the foam board was only 30 inches. No big deal. I cut the height to fit and just centered the completed panels in the space. You don’t really notice the little bit of wood showing on the sides.

Step 2: Cut the foam board.

chinacabinet_cut foam board

I used a cutting board and this fabric-cutting tool that looks like a pizza slicer for quick and clean cuts of the foam boards. I’m not a quilter, but these two tools come in handy for so many different projects. You could also use scissors.

Step 3: Cut the fabric.

chinacabinet_cutfabric

Place your cut foam board on a piece of fabric and cut the fabric about an inch longer than the foam board on all four sides. You don’t have to measure this exactly. Just eyeball the fabric and make sure you have enough to fold around all four sides of the foam board.

Steps 4 and 5: Glue the fabric to the foam board.

chinacabinet_secure corners

chinacabinet_gluesidesNext, fold the fabric around the foam board and secure with glue. I like to start by securing the corners and then folding up the sides of fabric just like wrapping a birthday present. Make sure you pull each side tight so the fabric does not look saggy in the front.

After gluing down all four sides, your panel is complete and ready to place inside the china cabinet.

chinacabinet_finishedpanelThis is the trickiest part of the entire project. I had to remove the shelves to make room for the panels to fit inside the china cabinet door. Then I jiggled everything around to get the panels and shelves back into place. It would probably help to have an extra set of hands for this step.

chinacabinet_placingpanels

A photo of the finished project beautifully decorated with my grandmother’s china should go right here.

[INSERT ME SCREAMING: NOOOOOOOO!!!!! AAAAAAAAGGGGHHHHH!!!!! Then I said some bad words.]

Here’s what happened: The china cabinet is old and needed some repairs. The glass is held in place by molding along the inside of the panels, but the molding had come loose in several sections. Some sides were completely loose so the glass was just jammed in there unsecured.  I was afraid the glass would eventually fall out, break and somebody would get hurt.

So we decided now would be a great time to make the repairs while the china cabinet was empty. Then I could wash all the dishes, arrange everything beautifully and shoot my Big Reveal photo. Easy peasy.

DSC_0044Instead, we accidentally punched a big hole through the glass on one side.

We could have just stopped, but we went for “one more nail” just to be super-secure. At least nobody got hurt, but still … [INSERT ME SCREAMING AGAIN!!]

OK. I’m calmer now. Everything is fine. Just FINE. 🙂

The Big Reveal photo will have to wait until we can get a new glass panel installed.

In the meantime…

You can create fabric-covered panels to fit any type of cabinet or bookshelves for a super-easy and super-cheap makeover or to add a pop of color to a room without the long-term commitment of paint. It would also be fun to create seasonal panels to trade out throughout the year.

Just be extra-careful if you try to make any repairs!

–Courtney

4 responses to “DIY: A No-Paint, No-Sew, Super-Cheap, Super-Easy, Awesome China Cabinet Make-Over!

  1. Love it! I’ve had great success using styrofoam insulation boards from Home Depot. They come in 4 x 8 sheets, so the extra big size means they will fit just about anything.

    • Thank you Rachel! Thanks for the great tip. I didn’t know about those boards at Home Depot. I might re-do mine to fit perfectly since I have all the shelves out anyway while the glass gets fixed.

Comments are closed.